|
LightAV.com
Price
|
Click for larger
picture
|
Description
|
Retail
Price
|
PA 435X
4 X 35 Watt Amplifier
US $Call
|
|
- Xantech is pleased to introduce
a new addition to its PA series of multi-channel power amplifiers - the
PA435X. With the same great sound and reliability as the existing PA1235,
PA1235X, PA635 and PA635X, this new unit adds a new configuration to the
family - four channels at 35 Watts per channel.
Designed for any application
using a multi-zone pre-amp that does not require having IR control built
into the amplifier, it is an ideal complement to the MRC88 Eight-Source
Eight-Zone Audio and Video Entertainment System providing audio amplification
for zones seven and eight at 35 watts per channel. It easily interface with
the MRC88 Controller/Amplifier using a standard stereo mini-plug cable allowing
power control and muting from the MRC88.
* Selectable
Channel Modes
*
DC Voltage Controlled (main power)
*
Low Impedance Capability
*
Auto Protection
*
Front panel status LED’s
*
Directly interfaces with the MRC88 Controller/Amplifier via standard stereo
mini-plug allowing power control and muting from the MRC88
|
$ |
PA 4100X
4 X 100 Watt Amplifier
US $Call
|
|
- Xantech is pleased to introduce
a new addition to its PA series of multi-channel power amplifiers - the
PA4100X. With the same great sound and reliability as the existing PA1235,
PA1235X, PA635 and PA635X, this new unit adds a new configuration to the
family - four channels at 100 Watts per channel.
Designed for any application
using a multi-zone pre-amp that does not require having IR control built
into the amplifier, it is an ideal complement to the MRC88 Eight-Source
Eight-Zone Audio and Video Entertainment System providing audio amplification
for zones seven and eight at 100 watts per channel. It easily interface
with the MRC88 Controller/Amplifier using a standard stereo mini-plug cable
allowing power control and muting from the MRC88.
* DC
Voltage Controlled (main power)
*
Low Impedance Capability
*
Auto Protection
*
Front panel status LED’s
*
Directly interfaces with the MRC88 Controller/Amplifier via standard stereo
mini-plug allowing power control and muting from the MRC88
*
Intelligent, temperature controlled cooling system
|
$ |
PA 635
6 X 35 Watt Amplifier with
IR
US $Call
PA 635
6 X 35 Watt Amplifier
US $Call
|
PA 635
PA 635X
|
- Common Featers and Specs
- Selectable Channel Mode
1 :3 stereo, 35 watts/ch
- Selectable Channel Mode
2 :1 stereo, 70 watts/ch bridged or 1 stereo, 35 watts/ch and
1 stereo 80 watts/ch bridged
- Selectable Channel Mode
3 : 3 mono, 80 watts/ch bridged
- IR controlled level, balance
and mute for each channel pair? 635 Only
- Common input buss individually
selectable for each stereo amp? 635 Only
- On/Off control of each
stereo amp: 635 IR and DC voltage/ 635X Main power only
- Low Impedance Capability
4 Ohm
- Auto Protection Each channel
is protected separately if a short or very low impedance is detected at the
speaker terminals. Operation is restored after the short is removed.
- Rack Mountable 2 x 19"
rack spaces
- Multi-color LED's, one
per stereo amp indicate Power (P), Mute (M) and High Level (H) : 635 3-P,
M and H/ 635X 3-P and H
- Requires RC68+ Programmer
for IR control 635 Only
- Power Output Rated continuous
power, each channel: 8 ohms 35 watts (all channels
- simultaneously driven,
20 Hz to 20kHz at rated THD, 8 ohms)
- Short Term Continuous
Power Each channel: 8 ohms, 55 watts (2 channels drive, 1 kHz, at rated
THD) or 4 ohms, 60 watts
- Bridged Power Output Each
pair: 8 ohms, 150 watts (Short term continuous, one pair driven, 1 kHz, at
rated output power)
- THD Rated THD < 0.08%,
Damping Factor: (@ 50Hz, 8 ohms, rated power) > 100,
- S/N Ration: A-Weighted
(ref. to rated power) > 96dB
- Input Sensitivity 0.2V
to 3.3V
- Remote Trigger Voltage
+5 to +30VDC
- Power Supply 120VAC, 60Hz;
240VAC, 50Hz (European version)
* PA 635 6 X 35 Watt Amplifier
*
Selectable Channel Modes
*
IR controlled level, balance and mute
*
Local or Common Buss
*
IR and DC Voltage Controlled
*
Low Impedance Capability
*
Auto Protection
*
Rack Mountable
*
Front panel status LED's
*
PA 635X 6 X 35 Watt Amplifier
*
Requires RC68+ Programmer for IR control
*
Selectable Channel Modes
*
DC Voltage Controlled (main power)
*
Low Impedance Capability
*
Auto Protection
*
Rack Mountable
*
Front panel status LED's
|
$ |
PA 640
6 X 40 Watt Amplifier
US $Call
|
|
- *
Cost/Size Efficiency. The PA640 features six 40-watt amplifiers. This gives
the installer a 3-zone system with a stereo 40- watt amplifier for each zone.
The low profile design, plus multiple amplifiers in a single package, delivers
high quality at a reasonable price.
- * Input
Level Flexibility. The input levels are individually adjustable from a low
of 0.2 volts up to 3.3 volts. This gives the installer the ability to adjust
the overall gain of the system or zone. For instance, there may be a need
to adjust the amplifier to deliver a controlled, maximum sound level into
a zone when the volume control on the preamp is set to maximum. This would
act as a volume limiter for any particular zone.
- * 6-5-4-3
Output Flexibility. Each pair of amplifiers can be bridged to allow several
channel and power output capabilities. It can be configured into four power
packages as follows:
-
• Six 40-watt amplifiers
-
• One 100 and four 40-watt amplifiers
-
• Two 100 and two 40-watt amplifiers
-
• Three 100-watt amplifiers
-
This gives the PA640 added use in many other applications, such as driving
surround sound speaker systems.
- * Low
Impedance Capability. Each amplifier is 2-Ohm safe under music conditions
in stereo mode and 4-Ohm safe when bridged. This means you can drive two
pairs of 8- ohm speakers in stereo mode in each zone with ease.
- * Discrete
Output Devices. All output and driver transistors are separate devices connected
in a full-complimentary Darlington configuration. This provides highest
reliability in concert with highly linear dynamic performance free of T.I.M.
and slew induced distortions.
- * Auto
Protection Circuit. Protects the PA640 if a short or very low impedance is
detected at the speaker terminals. Each amplifier pair is protected separately,
with an LED indicator showing which pair is in protection. Normal operation
is restored automatically within 3 to 4 seconds after the short is removed.
- * Remote ON/OFF Jack.
This jack allows the PA640 to be powered on and off by a positive DC control
voltage ranging between 4 and 30 volts. Specifically, it permits the 12 volt
CO output from the ZPR68 to switch PA640's on and off automatically with
zone power commands.
- *
Number of Channels: 6
- * Rated Continuous Power,
Each Channel: 8 Ohms 40 Watts (All 6 channels simultaneously driven, 20 Hz
to 20 kHz, at rated THD, 8 Ohms)
- * Short
Term Continuous Power, Each Channel: 8 Ohms > 50 Watts (2 channels driven,
1 kHz, at rated THD) 4 Ohms > 70 Watts
- * Bridged
Power Output: 8 Ohms > 140 Watts (Short Term Continuous, one pair driven,
1 kHz, at rated THD)
- * Rated
THD: < 0.08 %
- * S/N
Ratio, A Weighted (ref. to rated power): > 96 dB
- * Frequency
Response (@ 1 Watt, ± 3 dB): 8 Hz to 100 kHz
- * Input
Sensitivity, Input Gain Position: Max. 0.2 V, Mid. 1.0 V, Min. 3.3 V
- * Power
Supply: 120 VAC, 60 Hz
- * International
version available.
- * Remote
ON/OFF trigger voltage: +4 to +30 VDC
- * Dimensions:
12.25" x 13.5" x 3.6" (312mm x 343mm x 92mm)
- *
Weight: 14.3 lbs.
|
$ |
PA 1235
12 X 35 Watt Amplifier
with IR
US $Call
PA 1235X
12 X 35 Watt Amplifier
US $Call
|
PA1235
PA1235X
|
Selectable Channel Mode
1: 6 stereo, 35 watts/ch : 3 stereo, 35 watts/ch
Selectable Channel Mode
2 : 4 stereo, 35 watts/ch and 1 stereo, 70 watts/ch bridged
Selectable Channel Mode
3 : 2 stereo, 35 watts/ch and 2 stereo, 80 watts/ch bridged
Selectable Channel Mode
4 : 3 stereo, 80 watts/ch bridged
IR controlled level,
balance and mute for each channel pair? 1235 Only
Common input buss individually
selectable for each stereo amp? 1235 Only
On/Off control of each
stereo amp : 1235 IR and DC voltage/ 1235X Main power only
Low Impedance CapabilityEach
amplifier is 4-ohm rated. This means two pair of 8-ohm speakers can be
driven safely in each zone.
Auto Protection Each
channel is protected separately if a short or very low impedance is detected
at the speaker terminals. Operation is restored after the short is removed.
Rack Mountable 3 x 19"
rack spaces
Multi-color LED's, one
per stereo amp indicate Power (P), Mute (M) and High Level (H) 1235
6-P, M and H 1235X 6-P and H
Requires RC68+ Programmer
for IR control 1235 Only
Power Output Rated continuous
power, each channel: 8 ohms 35 watts (all channels simultaneously driven,
20 Hz to 20kHz at rated THD, 8 ohms)
Short Term Continuous
Power Each channel: 8 ohms, 55 watts (2 channels drive, 1 kHz, at rated THD)
or 4 ohms, 60 watts
Bridged Power Output
Each pair: 8 ohms, 150 watts (Short term continuous, one pair driven, 1
kHz, at rated output power)
THD Rated THD < 0.08%,
Damping Factor: (@ 50Hz, 8 ohms, rated power) > 100
S/N Ration: A-Weighted
(ref. to rated power) > 96dB
Input Sensitivity 0.2V
to 3.3V
Remote Trigger Voltage
+5 to +30VDC
Power Supply 120VAC,
60Hz; 240VAC, 50Hz (European version)
PA 1235 12 Channel 35 Watts Per Channel
Amplifier
*
Selectable Channel Modes
*
IR controlled level, balance and mute
*
Local or Common Buss
*
IR and DC Voltage Controlled
*
Low Impedance Capability
*
Auto Protection
*
Rack Mountable
*
Front panel status LED's
*
Requires RC68+ Programmer for IR control
PA 1235X 12 Channel 35 Watts Per Channel
Amplifier
*
Selectable Channel Modes
*
DC Voltage Controlled (main power)
*
Low Impedance Capability
*
Auto Protection
*
Rack Mountable
*
Front panel status LED's
|
$ |
