LightAV.com
Price
|
Product Shot
|
Description
|
Retail
Price
|
Common
Features
|
|
Style, Innovation, Performance.
Three qualities for which Xtant Technologies, the industry's leader for
elegantly designed, performance-driven mobile audio products, has been
praised since its foundation. For CES 2005 Xtant has taken this tradition
of excellence even further to offer the Xe Series line of amplifiers. The
enhanced line offers on-board performance modules to make the Xe Series
the most tunable and customizable amplifiers available.
When you're buying a new car,
you can either take home the base model with crank windows and manual locks
or you can upgrade to the kind of custom ride your friends will envy. Until
recently, Xtant Technologies has offered a base model with the option to
upgrade your amplifier by adding options like bass boost and EQ if you
were looking for something more customized. With the Xtant Xe Series, Xtant
has done away with the base model and created the ultimate bass model;
one that includes the additional accessories already built in to make your
ride the hottest on the block.
When Xtant created the Xe Series,
its goal was to provide the best amplifier Xtant had to offer with the
kind of versatility that every audiophile dreams of. Xtant customers seek
perfection and customization and the Xe Series provides the ability to
adjust the music to their own personal taste. Offered in X603e, X604e and
X1001e models, the new Xe Series is unparalleled in the mobile audio industry.
The thermal management is implemented
through a modification of the output and power supply device hold down
bar. The devices are held securely to the tunnel extrusion providing a
more efficient transfer of heat. (XTC)
The cover makes all wiring connections
non-visible.
Xe Series amplifiers contain
Balanced Line Inputs, Internal docking ports, fully regulated PWM power
supply, hand-matched MOSFET output stage, gold plated RCA inputs and outputs,
and a thermally controlled, forced air fan cooling system .
Xe Series amplifiers also have
Built-in 24dB High, low and bandpass electronic crossovers, noise gate
circuitry, sophisticated protection circuitry, and an automated thermal
management system.
Made in the USA
|
|
X603e
US $Call
|
|
-
Specifications
-
Number of Channels 3
-
Watts per Channel 4 Ohm 2 x 75 +
1 x 150
-
Watts per Channel 2 Ohm 2 x 150
+ 1 x 300
-
Front Channels bridged mono
-
at 4 Ohms 1 x 300
-
Distortion <2% THD Measured at
20-20KHz at rated power all channels driven
-
Signal to Noise Ratio >100dB A-Weighted
in 20KHz noise bandwidth @ 1 volt sensitivity
-
Damping Factor >200 @ 100
hz @ 4 Ohms
-
Frequency Response 20Hz-20KHz +/-
1 dB
-
Input Sensitivity 100 mV - 8.5V
Unbalanced, 100 mV-17V balanced
-
Input to line output gain 0dB +/-
20 dB Selectable in 10 dB steps
-
Onboard 12 or 24 dB per Octave Butterworth
Crossovers
-
Operational Voltage 11-15V
-
Dimensions 20-21/32 L x 8-7/8" W
x 27/32" H
-
Requires 100A Fuse
-
Module Ports 4-Accessory
Features
-
In addition to the RM8 module that
has been included in the X603 amp since its inception, the following modules
have been added for the Xe Series:
-
(1) PMQ, (1) LFQ, (1) RGM, (1) RM12,
(1) RM4
-
Fully Regulated PWM Power Supply
-
Complimentary MOSFET Design
-
Defeatable Balanced Input
-
Adjustable Input Sensitivity
-
24dB/oct Low Pass, High Pass, Bandpass
Crossover
-
RCA Outputs with 24dB/Oct Crossover
-
Left & Right Independent Gains
-
Adjustable Noise Gate
-
Passive Rear Channels
|
$ |
X604e
US $Call
|
|
-
Specifications
-
Number of Channels 4
-
Watts per Channel 4 Ohm 4 x 75
-
Watts per channel 2 Ohm 4 x 150
-
Bridged Mono at 4 Ohm 2 x 300
-
Distortion <2% THD Measured at
20-20KHz at rated power all channels driven
-
Signal to Noise Ratio >100dB A-Weighted
in 20KHz noise bandwidth @ 1 volt sensitivity
-
Damping Factor >200 @ 100
hz @ 4 Ohms
-
Frequency Response 20Hz-20KHz +/-
1 dB
-
Input Sensitivity 100 mV - 8.5V
Unbalanced, 100 mV-17V balanced
-
Input to line output gain 0dB +/-
20 dB Selectable in 10 dB steps
-
Onboard 12 or 24 dB per Octave Butterworth
Crossovers
-
Operational Voltage 11-15V
-
Dimensions 23-5/8 L x 10-9/32" W
x 25/32" H
-
Requires 120A Fuse
-
Module Ports 4-Accessory
-
Balanced Line 2-On Board
-
Features
-
In addition to the RM8 module that
has been included in the X604 amp since its inception, the following modules
have been added for the Xe Series:
-
(2) PMQ, (1) RM12, (1) RM4
-
Fully Regulated PWM Power Supply
-
Complimentary MOSFET Design
-
Defeatable Balanced Input
-
Adjustable Input Sensitivity
-
24dB/Oct Low Pass, High Pass, Bandpass
Crossover
-
RCA Outputs with 24dB/Oct Crossover
-
Left & Right Independent Gains
-
Adjustable Noise Gate
-
Passive Rear Channels
|
$ |
X1001e
US $Call
|
|
-
Number of Channels 1
-
Watts per Channel 4 Ohm 1 x 500
-
Watts per Channel 2 Ohm 1 x 1000
-
Watts per Channel 1 Ohm 1 x 1000
-
Distortion <2% THD
-
Signal to Noise Ratio >90dB
-
Damping Factor >200 @ 100 hz @ 4
Ohms
-
Frequency Response 5Hz - 500 Hz
+/- 3 dB
-
Input Sensitivity 100 mV - 8.5V
Unbalanced, 100 mV-17V balanced
-
Input to line output gain 0dB +/-
20 dB Selectable in 10 dB steps
-
Onboard 12 or 24 dB per Octave Butterworth
Crossovers
-
Operational Voltage 11-15V
-
Dimensions 20-11/16 L x 10-5/16"
W x 2-3/16" H
-
Module Ports 2-Accessory
-
Requires 120A Fuse
-
Features
-
The following modules have been
added for the Xe Series:
-
(1) PMQ, (1) LFQ, (1) RGM
-
Regulated Transitional Class DTechnology
-
Fully Regulated PWM Power Supply
-
Complimentary MOSFET Design
-
Defeatable Balanced Input
-
RCA Outputs with 24dB/Oct Crossover
-
Phase Inversion
-
1/0 gauge Power and Ground Connectors
-
Dual Speed Fan Circuit
|
$ |