Xtant Series Amplifiers
@ LightAV.com
xtant,amp,amplifier,x,series,1001,603,604,1.1,6.1,3.1,4.4,2.2,1.1i,2.2i,3.1i,6.1i,mono,2,4,channel,ch,audiophile,made,usa,class,d,24,dB,octave,sq,sound,quality,
xtant,amp,amplifier,x,series,1001,603,604,1.1,6.1,3.1,4.4,2.2
Read this when comparing prices and shopping online

Rules about Internet Retail
Are there any warranties?

LightAV.com Specials
Thunder Audio Video Store with 20,000+ more products!! Click Here
Other Products
Alarms
Amplifiers
DJ / Pro Audio
GPS/Sattelite Radio Systems
Installation Accessories
Mobile Video
Neon Lights
Xenon Headlights
Radar Detectors/Jammers
Speakers/Subs
Stereos
Sub Boxes

LightAV.com 
Price
Product Shot
Description
Retail 
Price
Xtant 1.1i

US $Call

  • Specifications 

  • Number of Channels 1 
    Watts per Channel 4 Ohm  1 x 100 
    Watts per channel 2 Ohm   1 x 100
  • Distortion <1% THD Measured at 20-20KHz at rated power all channels driven
  • Signal to Noise Ratio >100dB A-Weighted in 20KHz
  • Frequency Response 17Hz-21KHz +0, -2dB
  • Input Sensitivity 100 mV - 8.5V Unbalanced, 200 mV-17V  balanced
  • Operational Voltage 10-16V
  • Dimensions 6.5 L x 5.81" W x 1.63" H
  • Fully Regulated PWM power supply

  • Requires 10A Fuse

        AUDIOPHILE FULL SPECTRUM CLASS D TECHNOLOGY
    The Xtant1.1i adds local and global multiple nested feedback loops with premium MOSFETs and OPAmps for switching stability and audio signal accuracy within the full range spectrum. This results in an extremely high switching speed—over 1MHz.

    Because the switching speed is over 1MHz, we are able to set the output filter frequency high enough to avoid any phase related distortion within the higher frequency range of the audio signal. This enhances the musical reproduction by ensuring the higher frequencies (cymbals and the like) compliment the entire frequency range to bring new realism to the Class D amplifier sound experience.

    The Audiophile Full Spectrum Class D Technology with Xtant’s attention to detail results in a Class D amplifier that sounds better than many audiophile Class A/B amplifiers. It exhibits an extremely low noise floor eliminating the “hiss” common to many Class D amplifiers. The improved dynamic range enables the accurate reproduction of every loud and quiet passage within the musical range. This makes the amplifier exceptionally suited for musical and theater applications.

    Features 
    Xtant amplifiers feature a Fully Regulated, Pulse Width Modulated power supply. This power supply technology provides high efficiency and consistent output performance even when battery voltage is less than optimum. 
    The Balanced input circuit increases common mode noise rejection and eliminates ground loop noise while allowing for 100mv to 17 volts of signal input. This circuit also makes interfacing with any factory head-unit easy. 
    Both Thermal and Overcurrent protection are incorporated into Xtant amplifiers. In the event of a problem, the amplifier will reduce its power to maintain operation. 
    These small footprint mono-block amplifiers are ideal for vehicles that have limited space and allows for unlimited installation creativity in any application. The mono-block concept also allows for easy audio and/or video system configuration (2-, 3-, 4-, 5-, 6-, or 7-Channel). 

$349
Xtant 2.2

US $Call

  • Specifications 
  • Number of Channels 2 
  • 50 Watts per Channel 4 Ohm 
  • 100 Watts per Channel 2 Ohm 
  • 200 Bridged Mono @ 4 Ohm
  • Distortion <1% THD Measured at 20-20KHz at rated power all channels driven
  • Signal to Noise Ratio >100dB A-Weighted in 20KHz noise bandwidth @ 1 volt sensitivity
  • Damping Factor  >200 @ 100 hz @ 4 Ohms
  • Frequency Response 20Hz-20KHz +/- 1 dB
  • Input Sensitivity 100 mV - 8.5V Unbalanced, 200 mV-17V  balanced
  • Input to line output gain 0dB
  • Onboard Crossovers 
  • High Pass 12 dB/Octave variable from 40-120 Hz
  • Low Pass 24 dB/Octave variable from 40-120 Hz
  • 0-12 dB Bass boost @ 45 Hz
  • A.R.C. 0-15 dB level adjustment
  • Balanced line on-board
  • Operational Voltage 10-16V
  • Dimensions 11-11/16 L x 9-1/16" W x 2" H
  • Requires 30A Fuse
  • Features 
  • Fully Regulated PWM Power Supply 
  • N-Channel MOSFET Design 
  • Defeatable Balanced Input 
  • Continuously Variable 24dB/Oct Low Pass Crossover 40-120Hz 
  • Continuously Variable 12dB/Oct High Pass Filter 40-120hz 
  • Variable Bass Boost at 45 Hz 0-12dB 
  • Active Resonance Control (ARC) 
  • 2 Full Range RCA Outputs 
  • Left & Right Independent Gains
$
Xtant 4.4

US $Call

  • Specifications 
  • Number of Channels 4 
  • 50 Watts per Channel 4 Ohm
  • 100 Watts per Channel 2 Ohm 
  • 200 X 2  Bridged Mono at 4 Ohm
  • Distortion <2% THD Measured at 20-20KHz at rated power all channels driven
  • Signal to Noise Ratio >100dB A-Weighted in 20KHz noise bandwidth @ 1 volt sensitivity
  • Damping Factor  >100 @ 100 hz @ 4 Ohms
  • Frequency Response 20Hz-20KHz +/- 1 dB
  • Input Sensitivity 100 mV - 8.5V Unbalanced, 200 mV-17V  balanced
  • Input to line output gain 0dB
  • Onboard Crossovers 
  • Front High Pass 12 dB/Octave variable from 40-120 Hz
  • Rear High Pass 12 dB/Octave variable from 40-120 Hz or
  • Rear Low Pass 24 dB/Octave variable from 40-120 Hz
  • 0-12 dB Bass boost @ 45 Hz
  • A.R.C. 0-15 dB level adjustment
  • Balanced line on-board
  • Operational Voltage 10-16V
  • Dimensions 15-9/16 L x 9-1/16" W x 2" H
  • Requires 60A Fuse
  • Features 
  • Fully Regulated PWM Power Supply 
  • N-Channel MOSFET Design 
  • Defeatable Balanced Input 
  • Active Resonance Control (ARC) (Found only in front channels) 
  • 4 Full Range RCA Outputs 
$599
Xtant 3.1

US $Call

  • Specifications 

  • Number of Channels 1 
    150 Watts per Channel 4 Ohm 
    300 Watts per Channel 2 Ohm
  • Distortion <2% THD Measured at 20-20KHz at rated power all channels driven
  • Signal to Noise Ratio >100dB A-Weighted in 20KHz noise bandwidth @ 1 volt sensitivity
  • Damping Factor  >100 @ 100 hz @ 4 Ohms
  • Frequency Response 20Hz-20KHz +/- 1 dB
  • Input Sensitivity 100 mV - 8.5V Unbalanced, 200 mV-17V  balanced
  • Input to line output gain 0dB
  • Onboard Crossovers 
  • Low Pass 24 dB/Octave variable from 40-120 Hz
  • 0-12 dB Bass boost @ 45 Hz
  • A.R.C. 0-15 dB level adjustment
  • Balanced line on-board
  • Operational Voltage 10-16V
  • Dimensions 11-11/16 L x 9-1/16" W x 2" H

  • Requires 40A Fuse
    Features 
    Regulated Transitional Class D Technology 
    Fully Regulated PWM Power Supply 
    N-Channel MOSFET Design 
    Continuously Variable 24dB/Oct Subsonic Filter
    20-80Hz 
    RLC Connector 
    2 Full Range RCA Outputs
$449
Xtant 6.1

US $Call

  • Specifications 

  • Number of Channels 1 
    Watts per Channel 4 Ohm 300 
    Watts per channel 2 Ohm 600 
  • Distortion <2% THD Measured at 20-20KHz at rated power all channels driven
  • Signal to Noise Ratio >100dB A-Weighted in 20KHz noise bandwidth @ 1 volt sensitivity
  • Damping Factor  >100 @ 100 hz @ 4 Ohms
  • Frequency Response 20Hz-20KHz +/- 1 dB
  • Input Sensitivity 100 mV - 8.5V Unbalanced, 200 mV-17V  balanced
  • Input to line output gain 0dB
  • Onboard Crossovers 
  • Low Pass 24 dB/Octave variable from 40-120 Hz
  • 0-12 dB Bass boost @ 45 Hz
  • A.R.C. 0-15 dB level adjustment
  • Balanced line on-board
  • Operational Voltage 10-16V
  • Dimensions 15-9/16 L x 9-1/16" W x 2" H

  • Requires 80A Fuse
    Features 
    Regulated Transitional Class D Technology 
    Fully Regulated PWM Power Supply 
    N-Channel MOSFET Design 
    Continuously Variable 24dB/Oct Subsonic Filter
    20-80Hz 
    RLC Connector 
    2 Full Range RCA Outputs
$599


Questions/Comments/Pricing

<>