|
|
|
|
ATTN: Unfortunately Oz has
become a victim of the "we can do it too guys" and has gone out of business.
. There are some crazy specials on components, woofers, and amplifiers. Very
limited stock. 3/21/08 |
|
|
|
|
|
|
Xenon Headlights |
|
|
|
|
|
|
|
|
4 X 50 Watts RMS |
|
|
$ |
150 W RMS X 2 Closeout!! |
|
2-ohm stable (stereo), and offering a subwoofer motivating 150WRMS x 2 (4-ohm mono) and with a dynamic power rating of 300WRMS x 2 makes this a must have for dealers everywhere! The VA150.2 can operate as a 2/1 channel amp to fit every application or situation. With its small footprint, it's perfect for vehicles that are tight on space and still demand performance. Our 12.5V rating guarantees that your customers will feel and hear the difference when Oz Audio amplifiers are used. Seasoned installers will appreciate all of the bells and whistles: Light up blue Oz logo for family uniformity, 12dB high pass filters, 12dB low pass filters, 12dB subsonic (for three channel mode), independant gain controls, and a remote bass knob for those three channel installs. Why shouldn't your customers have independent sub control in their hot rods, standard cab pickups, or every install? Designed and engineered in the USA OZ VA150.2 Specification Class A/B operation High efficiency MOSET Amplifier 2 Ohm stable (stereo) 4 Ohm bridgeable MOSET input & output transistors Oversized capacitor banks Remote bass control Fully adjustable High & Low-Pass X-Over for front and rear Soft turn-on & turn-off capabililty Gold-plated inputs, outputs and RCA jacks 4 gauge power & ground inputs Three-year warranty (when purchased and installed by an Authorized Oz Audio Dealer) RMS Power @ 4 Ohm Mono (14.4V) 175W X 2 RMS Power @ 2 Ohm Mono (14.4V) 200W X 2 RMS Power @ 4 Ohm Mono (14.4V) 240W X 2 RMS Power @ 4 Ohm Mono (12.5V) 300W X 2 RMS Power @ 2 Ohm Mono (12.5V) 300W X 2 RMS Power @ 4 Ohm Mono (12.5V) 200W X 2 THD < 0.05% Frequency Response 5 20 Hz Signal to Noise > 100 dB Damping Factor > 90 Input Sensitivity 0.2 8 Volt Variable Low-Pass 50 200 Hz Variable High-Pass 50 500 Hz Variable Subsonic 10 100 Hz Slope per Octave 12 dB Dimensions 10.5 x 2.25 x 13 |
$ |
2000 RMS X 1 |
|
Ohm's law states: P = E x I or Watts = Voltage x Current. Let's fill in the variables. For current use the recommended fuse rating for the ampliflier. P = 12.5V x 200amps {Simplify} P = 2500W Now adjust for amplifier effiency (average 80%+) P = 2500W x .80 P = 2000W Look at that, it works. |
$ |
|
All Text Graphis and Logos belong to JTI Inc.