LightAV.com
Price
|
Product Shot
Click for larger picture
|
Description
|
Retail
Price
|
XX
Super D Class
Hifonics “Super D” tm class
is utilized in our top of the line Generation XX amplifier Series and in
our large power Brutus series. Relying on an enhanced chip set featuring
higher current capacity and better D/A conversion, Hifonics Super D provides
a lower distortion level at high listening levels and possesses a greater
efficiency rating than analog and lesser D-Class designs.
Plus, once you go above
1500 Watts in a D-Class configuration, a D-Class chip set becomes exponentially
more exacting and expensive. That's why you'll see an increase in price
and value in our bigger D-Class models.
Power or Sound Quality?
Power is everything. You
know it, your friends know it, and most importantly, those who don't have
Hifonics know it. But what about sound quality? Generation XX does that
too!
If you need sound quality
with high power our A/B class of amplifiers, Chaos, Jupiter and Olympus
are the finest to use. If you want brute strength our monster Super D-Class
(Zeus, Hercules and Colossus) will rip your head off (sonically and accurately
of course).
What's Inside Counts!
The Generation XX amplifier
series is the crème de le crème of high-powered amplifiers.
You will notice the massive number of bipolar audio power devices and MOSFETs
in the switching power supplies, extra large power transformers, and audiophile
grade components on the military grade printed circuit boards.
*Please note that all 200
Generation XX provide blue illumination.
|
|
Generation
XX Highlights
The frequency control allows
you to manipulate the HP (High Pass) and LP/BP (Low Pass/ Band Pass). The
bandpass section is formed by the Low Pass and Subsonic Filter settings.
You will notice that the Generation XX utilizes a multiplier switch for "X
1" or "X 10". This multiplying switch is to be used when making the HPF (High
Pass) "X 1" adjustment 40 Hz to 4000 Hz. The "X 10" should be used when adjusting
the LP or BP adjustment.
Balanced Line Input – Hifonics
offers this feature on all Generation XX amplifiers. Used in conjunction
with our XX BLD (Balanced Line Driver), this provides a step-up in input
voltage from 0.4 volts to 18 volts. This option ensures total compatibility
and allows the user for a nominal fee to add extra output to the amplifier
much like adding a nitrous system to your car.
When Gen XX amplifiers
are linked together you may run all channels from one set of crossovers
in the master/slave mode. This feature allows you to bridge two amplifiers
to one subwoofer. Phase Shift is an extraordinary feature that allows you
to adjust the speakers so the music you hear is centered and equal to both
ears. Phase shift allows you to adjust the speakers so that your ears are
the center point, thus the music sounds equal to both ears. In addition,
phase shift can eliminate phase distortion which can occur when components
used for the soundstage and the woofers do not present music coherently to
the listener due to the vehicles' acoustical properties or less than ideal
installation locations.
Bass Boost control sets
the amount of bass boost up to +18 dB, at the desired center frequency. Q
Control sets the bandwidth of the range of frequencies affected by the Boost
setting.
The variable subsonic filter
is fully operational between 10 Hz and 150 Hz on all Generation XX Class
A/B Class amplifiers and between 10 Hz and 50 Hz on all Generation XX D-Class
amplifiers.
|
|
XX Chaos
US$ Discontinued
New Models
Click Here
New
2007 Models
Click
Here
|
|
- Super Class A/B Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >300
- Signal to Noise Ratio >95
dB
- THD + Noise 0.03%
- Channel Separation >
70 dB
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Hi Output Whisper Fan
- Full PMW Ultra-Fi Mosfet
Power Supply
- LP-BP/Full/HP Crossovers
- Variable 12 dB/Octave High
Pass Filter (400 Hz- 4 KHz)
- Variable 12 dB(24 dB Mono)/Octave
Low Pass Filter (40 Hz- 400 Hz)
- Bass EQ 0-18 dB
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- 4 Guage Power Terminals
- 10 G Speaker Terminals
- 250 watts RMS x 2 channels
into 4 Ohms (stereo)
- 400 watts RMS x 2 channels
into 2 Ohms (stereo)
- 500 watts RMS x 2 channels
into 1Ohm (stereo)
- 800 watts RMS x 1 channel
into 4 Ohms (bridged)
- 1000 watts RMS x 1 channel
into 2 Ohms (bridged)
- Dimensions 11.10
W X 2.75" H X 20" L (Endcaps + 5.32")
|
$1250 |
XX Jupiter
US$ Discontinued
New Models
Click Here
|
|
- Super Class A/B Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >200
- Signal to Noise Ratio >93
dB
- THD + Noise 0.03%
- Channel Separation >
70 dB
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Hi Output Whisper Fan
- Full PMW Ultra-Fi Mosfet
Power Supply
- LP-BP/Full/HP Crossovers
- Variable 12 dB/Octave High
Pass Filter (10 Hz- 4 KHz)
- Variable 12 dB(24 dB Mono)/Octave
Low Pass Filter (40 Hz - 400 Hz)
- Bass EQ 0-18 dB
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- 4 Guage Power Terminals
- 10 G Speaker Terminals
- 75 watts RMS x 4 channels
into 4 Ohms (stereo)
- 110 watts RMS x 4 channels
into 2 Ohms (stereo)
- 140 watts RMS x 4 channels
into 1 Ohm (stereo)
- 250 watts RMS x 2 channel
into 4 Ohms (bridged)
350 watts RMS x 2 channel
into 2 Ohms (bridged)
Dimensions 11.10
W X 2.75" H X 17.4" L (Endcaps + 5.32")
|
$1100 |
XX Olympus
US$ Discontinued
US$ Discontinued
New Models
Click Here
|
|
- Super Class A/B Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >280
- Signal to Noise Ratio >93
dB
- THD + Noise 0.03%
- Channel Separation >
70 dB
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Hi Output Whisper Fan
- Full PMW Ultra-Fi Mosfet
Power Supply
- LP-BP/Full/HP Crossovers
- Variable 12 dB/Octave High
Pass Filter (10 Hz- 4 KHz)
- Variable 12 dB(24 dB Mono)/Octave
Low Pass Filter (40 Hz - 400 Hz)
- Bass EQ 0-18 dB
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- 4 Guage Power Terminals
- 10 G Speaker Terminals
- 125 watts RMS x 4 channels
into 4 Ohms (stereo)
- 200 watts RMS x 4 channels
into 2 Ohms (stereo)
- 250 watts RMS x 4 channels
into 1 Ohm (stereo)
- 400 watts RMS x 2 channel
into 4 Ohms (bridged)
500 watts RMS x 2 channel
into 2 Ohms (bridged)
Dimensions 11.10
W X 2.75" H X 20.86" L (Endcaps + 5.32")
|
$1300 |
XX Zeus
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 550 watts RMS x 1 channel
into 4 Ohms (bridged)
- 1100 watts RMS x 1 channel
into 2 Ohms (bridged)
- 1600 watts RMS x 1 channel
into 1 Ohm (bridged)
- Dimensions 11.10
W X 2.75" H X 19" L (Endcaps + 5.32")
|
$1500 |
XX Hercules
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 650 watts RMS x 1 channel
into 4 Ohms (bridged)
- 1300 watts RMS x 1 channel
into 2 Ohms (bridged)
- 2000 watts RMS x 1 channel
into 1 Ohm (bridged)
Dimensions 11.10
W X 2.75" H X 22.83" L (Endcaps + 5.32")
|
$1800 |
New for 2006!!!
XX Thor
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 1200 watts RMS x 1 channel
into 4 Ohms (bridged)
- 2100 watts RMS x 1 channel
into 2 Ohms (bridged)
- 3000 watts RMS x 1 channel
into 1 Ohms (bridged)
- Suggested In-Line Fuse
Rating 300 Amps
Dimensions 11.20
W X 2.60" H X 20.5" L (Endcaps + 5.32")
|
$3999.95 |
XX Colossus II
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 600 watts RMS x 2 channels
into 4 Ohms (stereo)
- 1100 watts RMS x 2 channels
into 2 Ohms (stereo)
- 1600 watts RMS x 2 channels
into 1 Ohms (stereo)
- 2000 watts RMS x 1 channel
into 4 Ohms (bridged)
- 3200 watts RMS x 1 channel
into 2 Ohms (bridged)
- Suggested In-Line Fuse
Rating 300 Amps
Dimensions 11.20
W X 2.60" H X 28" L (Endcaps + 5.32")
|
$3500 |
XX Cyclops
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 1500 watts RMS x 1 channel
into 4 Ohms (bridged)
- 2900 watts RMS x 1 channel
into 2 Ohms (bridged)
- 4000 watts RMS x 1 channel
into 1 Ohms (bridged)
- Suggested In-Line Fuse
Rating 300 Amps
Dimensions 11.20
W X 2.60" H X 23.75" L (Endcaps + 5.32")
|
$4999.95 |
XX Goliath
US$ Discontinued
New Models
Click Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 1250 watts RMS x 1 channel
into 4 Ohms (bridged)
- 2500 watts RMS x 1 channel
into 2 Ohms (bridged)
- 5000 watts RMS x 1 channel
into 1 Ohm (bridged)
- Suggested In-Line Fuse
Rating 500 Amps
- Dimensions 11.20
W X 2.60" H X 28" L (Endcaps + 5.32")
|
$4995 |
XX Maxximus
US $2149.95
Closeout 12 left 6/7/2007
New
2007 Models
Click
Here
|
|
- Ultra D Class Design
- Turn On Delay
- Frequency Response 2Hz
- 70 K Hz (-3dB)
- Damping >400
- Signal to Noise Ratio >98
dB
- THD + Noise 0.1%
- Variable Input Level 0.2V
- 9V (RCA/Unbalanced)
- Variable Input Level 0.4V
- 18V (Mini DIN Balanced)
- Full PMW Ultra-Fi Mosfet
Power Supply
- Variable 24 dB Octave Low
Pass Filter (35 Hz- 250 Hz)
- Variable Bass EQ 0-18 dB
(30-60 Hz)
- Variable Subsonic Filter
(10-50 Hz)
- Variable Phase Shift (Off/On/Stereo)
0-180 Degrees
- Unbalanced and Balanced
Inputs(Requires XX-BLD Line Driver)
- Remote Bass Control Included
- Dual 2 Guage Power Terminals
- 10 G Speaker Terminals
- 2000 watts RMS x 2 channels
into 4 Ohms (stereo)
- 3500 watts RMS x 2 channels
into 2 Ohms (stereo)
- 5000 watts RMS x 2 channels
into 1 Ohms (stereo)
- 7000 watts RMS x 1 channel
into 4 Ohms (bridged)
- 10000 watts RMS x 1 channel
into 2 Ohms (bridged)
- Suggested In-Line Fuse
Rating 1100 Amps
- Dimensions 11.20
W X 5.50" H X 28" L (Endcaps + 5.32")
|
$9995 |